Tools Required for Assembly ... 2Before You Start ...
Clamp PackJACKRABBITTMTONNEAUCOVERby:(800)338-3697TOOLS REQUIRED FOR ASSEMBLY: 7/16” wrench or socket5/16” wrench or socket3/32” Allen wrench W
3INSTALLATION INSTRUCTIONSRemove the top cover from the canister box and set it aside for later installation. Perform a quick inventory to insure all
STEP 4: INSTALL CHANNELPeel the foam backing and attach it to the bottom of the channel.Bolt the Canister Channel assembly to the rails using the Bla
Side rails have a rubber spacer on the end caps, at the tailgate end, to establish the correct spacing to the tailgate (1/16”) and to prevent the tail
6You have now completed the installation of your JackRabbit Series hard tonneau cover. If you have any questions please do not hesitate to call us at:
7INSTALLATION INSTRUCTIONSHELPFUL MAINTENANCE HINTS1. To open the cover, turn the actuator knob clockwise 90o until it clicks in the open position.
Please return this completed warranty registration within 14-days to: Pace Edwards Attn: Warranty Dept.2400 Commercial Blvd. Centralia, WA 98531PACE E
Commentaires sur ces manuels